RFID contactless card

RFID contactless card is a plastic or paper card which is embedded with a microchip and antenna inside, it is widely applied as access control card, employee ID card, hotel key card, parking card. Dual frequency RFID card is also available on request.

Size:CR80; CR50; size can be customized
Chip Available:
Low Frequency (LF): 125KHz
High Frequency (HF): 13.56MHz
Ultra High Frequency (UHF): 840~960MHz
Card Thickness:From 0.54mm~0.84mm; Thickness can be customized

We are providing RFID cards with various shapes, chips (Low Frequency, High Frequency, Ultra High Frequency) and material to meet different customers’ requirements. Standard RFID credit card size of CR80 is the most common sizes in Nexqo’ experience.

CR80: 86*54mm (3-3/8*2-1/8”)
Card Material: Plastic PVC, BioPVC®, PET and Paper available
Card Surface: Matte/Glossy/Frosted Finish

Chip options:
LF Chips: EM4200, EM4305, EM4450, Hitag256, ATA5577
HF Chips: Mifare S20, Mifare S50, Mifare S70, Ntag213, Ntag215, Ntag216, Desfire2k, Desfire4k, Desfire8k, Plus 2k, Plus 4k, I-Code2
UHF Chips: Alien Higgs3, Impinj Monza 4E, Impinj Monza 4D, Impinj Monza 4QT, NXP UCode

Besides, OPRFID provides programming and encoding services which exactly fit customer’s programming or encoding requirements. Customized information or data could be encoded into the microchip. With doing this, customers could put some corresponding information into the cards to make sure they are running on the right system and belong to the right person.

Available Crafts
All the following features can be added on our RFID cards.
Hot stamp (gold/silver/red), Laser silver/gold, Laser Engraving, Ink jet printing, Scratch off panel, Bar-code/QR code, Thermal printing, Hologram, Embossing, Adhesive sheet, UV ink, Hologram, Hole punch, etc.

Leave a Reply